1 · Take photos or a video
Walk around the thing you want measured. We tell you exactly how, step by step.
No special equipment. If you can take a video on your phone, you can use ScanIQ.
Walk around the thing you want measured. We tell you exactly how, step by step.
Open app.scaniq.online on your phone and upload. Our computers do the hard work, usually in under 30 minutes.
Sizes, a 3-D model you can spin with your finger, files you can download, and a clear verdict on how much to trust it.
Small parts on a workbench or a whole building on a street: same phone, same idea.
Film your bench empty, then film it again with the part on it. ScanIQ works out the part from the difference and tells you its length, width and height.
Lay our printed mat on the bench for real millimetres.
Walk around a house, shop or barn taking photos with location turned on. ScanIQ builds it in 3-D, finds it on the map, gives you the address, measures every wall and its height, and makes a model your architect or builder can open.
40 to 150 photos. Works best on a cloudy day.
Round parts, flat plates and curvy parts each get the method that suits them best, so the 3-D model comes out clean.
Measure one side with a ruler, tape or caliper and type it in. If it agrees with the scan, the result becomes a PASS.
If your photos have location, we look the building up on OpenStreetMap, the free world map, and show you its address, type and number of floors.
For jobs that need fine detail, we rent a powerful graphics computer for just that job, then switch it off.
Once your object is in the computer, we can test it the way engineers do, without breaking the real one.
We push on the digital copy and show where it is weakest, colour-coded from safe blue to danger red, and how many times stronger than needed it is.
Example: a motocross linkage came out 6.6× stronger than needed.
Every object has speeds where it starts to vibrate, like a wine glass singing. We find them so an engine or a bumpy road doesn't.
Bend a paperclip enough times and it snaps. We estimate how many bumps, turns or loads a part survives.
See how air or water moves over fans, propellers, pipes and exhausts.
Take weight out where the part doesn't need it and keep it strong where it does.
Check a motorcycle exhaust against racing noise rules before test day.
Download your result in the formats real people and real machines use.
An STL file you can send straight to a 3-D printer, or a STEP file for a machine shop.
Buildings come out as an IFC file, the standard file architects and builders use, with every wall and floor. Change the number of floors or the roof shape and it rebuilds in seconds.
A 3-D model you can put on a website or in a presentation, or view in your room with augmented reality on a phone.
Scan the part you printed, compare it with the plan and see exactly where it came out different.
Every result records which numbers were measured, which were assumed, and the rules used to judge them.
ScanIQ Studio turns real results into short, honest explainer videos.
Same three steps, very different jobs.
Remake a part they stopped making 30 years ago from the worn one in your garage.
Get your house measured and modelled before you call an architect.
Wall lengths, height and footprint of a property from one walk around it.
Record an old building or museum piece without touching it.
Scan a helmet or prop and print a perfect copy.
Design a mount that fits your machine exactly, and check it won't snap.
Copy a propeller and see how water flows around it.
Keep a library of scanned spare parts. When one breaks, print another tonight.
Check printed or cast parts against the plan and sort pass from fail.
A science lab in every phone: scan an object, then test it like an engineer.
Custom gear that fits you, checked for strength first.
Measure damage against the original shape with real numbers.
A phone camera is good, but it is not a precision instrument. We say so.
If only the camera measured it, we say NOT SURE YET, never PASS. A second check, like your tape measure or the map, is needed to PASS.
Every number is marked as measured by hand, measured from photos, or assumed. Assumed numbers can't go to manufacturing.
The pass/fail rules are fixed and versioned. We never bend them to make one job look better.