ScanIQ · Engineering|AIWarehouse · AI media & digital goods ↗

Demo

From a scanned part to a checked result

A real part, captured from photos, turned into a digital twin and checked for strength, vibration and fatigue. Every viewer below is interactive: rotate, zoom and hover for values.

Headline result

Air-fork cap: fatigue check passes

A KYB air-fork top cap (7075 aluminium) was scanned, rebuilt as a solid model and meshed with 87,097 nodes. It was then cycled from 0 to 0.24 MPa, the fork's fill/vent pressure.

Goodman utilisation 0.003

Fatigue safety factor 374 at the 99.9th-percentile stress. The pass limit is utilisation ≤ 0.667.

Life > 5×108 cycles

That is beyond the end of the S-N data. The required life is 1×106 cycles. Pass.

First mode 23.8 kHz

The requirement is above 450 Hz, well clear of the 15–300 Hz riding band. Static peak stress (p99.9) is 0.7 MPa.

Static stress result render

Static stress

von Mises stress under fill pressure on the shoulder, stem end and bore floor, with the thread held fixed.

Open interactive 3-D viewer
Scope of this result. The cycle covers fill/vent pressure only. In-stroke peak air pressure is not published, so in-stroke cycling is not yet covered. The surface factor is 1 (polished-specimen fatigue data). Machining marks and anodising lower it. Treat this as decision support, not certification.
How it works

Scan → twin → simulate → manufacture

One pipeline, with every number traceable to its source.

01

Scan

Phone photos on a calibrated mat give true scale.

02

Twin

Photos become a mesh, then a solid model ready for analysis.

03

Plan

Deterministic rules choose the checks and flag missing inputs.

04

Simulate

Static, vibration, fatigue and flow solves, each rendered for review.

05

Gate

Fail or missing data stops the job before anything is made.

06

Manufacture

Checked 3-D print and CNC toolpaths, read back and verified.

Workflow examples

Other parts through the same pipeline

These show the workflow on other parts. Their loads are placeholders, and the exhaust flow solve did not meet its convergence targets. Illustrative workflow, not design values.

Illustrative workflow, not design values.Exhaust: internal flow result render

Exhaust: internal flow

Steady flow through a generated exhaust geometry. Not converged to target residuals.

Open interactive 3-D viewer